Đặt banner 324 x 100

5-in-1 integrated equipment - gree with only 1 gree device separates food grease with 100% efficiency and successful food wastewater treatment at vietnam's largest food group


Green Eye Environment Co., Ltd. (GREE) exclusively distributes KWI's built-in flocculation equipment, settling, and filtration of KWI water treatment in Vietnam, Laos, and Cambodia markets. KWI Group is one of the pioneers in MDAF technology in the world established in 1949 by Dr. Milos Krofta. Currently, KWI has more than 17 global branches and more than 4700 systems that have been successfully applied in over 77 countries.
KWI projects that have been successfully implemented in Vietnam include: Watten Vietnam paper factory with a capacity of 2400 m3/day, Vina Kraft Bình Dương paper factory with a capacity of 13000 m3/day, NTPM Vietnam paper factory with a capacity of 3800 m3/day, Nam Bình Dương solid waste treatment complex with a capacity of 480 m3/day, and Thu Trọng seafood factory with a capacity of 400 m3/day.
GREE would like to introduce,
The processing of COD, Phosphorus, TSS, Grease targets achieves 100% efficiency... Thoroughness in food wastewater is always a matter of concern to investors and environmental companies. Only through 1 GREE device meets the requirements with a performance of up to 99%, reasonable investment costs.
GREE is the exclusive subsidiary of KWI Group (Austria) with more than 4700 systems across 77 countries globally distributing exclusively integrated equipment for flocculation, sedimentation, and filtration.  
The group's successful world-based food wastewater treatment projects include: Iowa Beef Food Factory (USA) with a capacity of 14,112 m3/day, Omsky Bekon Food Factory (Russia) with a capacity of 9,000 m3/day, Singsong Industrial Co., Ltd. (Korea) with a capacity of 7,488 m3/day. Nipponhan Food Processing Corporation (Japan) has a capacity of 4320 m3/day, Brakebush Brothers Group (USA) has a capacity of 1440 m3/day. In Vietnam, GREE's MNC equipment alone brings success to wastewater treatment at Vietnam's largest food group in the licorice noodle processing industry because of its outstanding treatment efficiency: Removing up to 100% of grease in wastewater
COD processing efficiency up to 91%, TSS 95%, Phosphorus 94%. Contributing to the output of standard B, QCVN 40 - 2011 / BTNMT after only 1 device
The total investment competes with traditional technology in the country. Operating the system 2200m3/day is simple with just 1 worker.
Chemicals are put directly into the pipe. There is no need for a stirring tank for flocculation like other products.
GREE wastewater treatment equipment saves area because the water flow time is only 8 minutes lower than 15-38 times lower than traditional technology with a water storage time of 2-5h.
Flexible in transportation and installation, easy to change the functionality of the equipment.

COMPARISON OF THE REALITY OF WASTEWATER TREATMENT KWI TECHNOLOGY AND TRADITIONAL PHYSIOLOGIC TECHNOLOGY IN THE FOOD INDUSTRY (INSTANT NOODLES)
TT CATERGORIES KWI TECHNOLOGY TRADITIONAL
PHYSIOLOGIC TECHNOLOGY
1 Treatment process + Integrating all 5 processes of flocculation, sedimentaion, microbiological treatment, flotation, and sludge concentrate in a single device. There is no need for a flocculation tank.
 
+ The chemical is put directly into the inlet wastewater duct and stirred with micro-bubble gas.
+ The process of flocculation, sedimentation, and flotation must build each tank separately ----> Cost of investment, area ...
 
+ Chemicals enrich the flocculation tank, create a separate construction flocculation tank, do not apply directly to the pipe, use the motor to stir.   
2 Structure and flexibility + Material: Stainless steel or steel
The tank is made of high-quality stainless steel/ steel, beautiful design, solid. The tank is designed into pieces pieced together. Flexible in transportation and installation, easy to change the functionality of the equipment.
+ Material: Reinforced concrete
The tank is usually built of reinforced concrete, fixed in one place so there is no flexibility in moving, reusing in another location when there is a need to switch functions.
3 Area of use With a capacity of 2200 m3/day
 
The processing equipment has an area of: D4500 (mm) x H1000 (mm) equivalent to 15.9 m2
 
About 6 times smaller than traditional technology. Savings on investment and installation costs
With a capacity of 2200 m3/day
 
The physiologic processing cluster has a calculated area of ~95.6 m2
 
 
The area of use is very large. Costly investment and construction costs.
4 Processing performance High processing performance:
Total phosphorus: 94%
TSS: 95%,
COD: 91%
It is capable of removing up to 77% without chemicals and removing most of the grease in wastewater when using chemicals.
 
Low processing performance:
Total phosphorus: 49%;
TSS: 61%;

The oil is removed at a separate stage, not integrated in traditional physicochemical technology.
6 Amount of sludge produced Post-treatment sludge achieves a high concentration of 3-5% higher than traditional technology to 4-5 times higher than traditional technology. Help reduce the cost of sludge treatment down
4-5 times more than traditional.
 
Post-treatment sludge is usually low in concentration < 1.0% of the cost of very high sludge treatment, which is very expensive.
 
7 Integrating micro-bubble technology into the water treatment process The application of micro-bubble system (ADR) has a size of 40-100 micro, so the ability to stick to the residue suspended in the water floats to the surface very well, almost no residue suspended in the water after treatment. There is no micro-bubble technology.
8 Cost of operating chemicals (physiologic processing) Low
- Remove large amounts of grease in wastewater without the use of chemicals.
- In case of wastewater treatment and phosphorus treatment, chemical cost 6902 VND/m3.
 
High
- Cost of wastewater treatment chemicals: 8.973 VNĐ/m3

Customers who are interested or in need of an advanced water treatment technology, saving operating cost, efficiency, reducing investment costs for their projects:
Contact me through GREEN EYE ENVIRONMENT COMPANY(GREE)
Address: 130 Nguyễn Công Trứ, P. Nguyễn Thái Bình, Q.1, Thành phố Hồ Chí Minh
Phone: (028)38279706 – 0981687909
Email: kinhdoanh@gree-vn.com
Website: http://www.gree-vn.com/cong-nghe-xu-ly-nuoc-thai-gree
Facebook:  https://www.facebook.com/KWI.Vietnam

See more about  KWI Environmental Company's Wastewater Treatment Technology
Tag: Environmental companywastewater treatment, emission treatment
 

Thông tin liên hệ


: GreeTuyen
:
:
:
: